Supermatter Engine ErisEn - Revision history

Firefox13: /* Shields */ added info in input cap for shield gen

2023-08-28T14:31:12Z

Shields: added info in input cap for shield gen

← Older revision		Revision as of 14:31, 28 August 2023
Line 43:		Line 43:
	* Set '''Field Range''' to maximum possible - '''200'''.		* Set '''Field Range''' to maximum possible - '''200'''.
	**This ensures that whole ship is covered by shield. Using lower settings is unrecommended as it may leave parts of ship unprotected.		**This ensures that whole ship is covered by shield. Using lower settings is unrecommended as it may leave parts of ship unprotected.
−	* Set '''Input Cap''' to something big - '''3000 ~~or 5000~~''' kW ~~should~~ ~~do.~~	+	* Set '''Input Cap''' to something big - '''3000''' kW is usually enough
−	** ~~Too~~ low input cap will make shield generator passively lose power.	+	** '''Very''' low input cap (lower than current "Upkeep Energy Use") will make shield generator passively lose power.
		+	**Low input cap will make the shield generator charge very, ''very'' slowly.
	* Turn on the following modesː		* Turn on the following modesː
	** '''Hyperkinetic Projectiles''' to stop incoming meteors.		** '''Hyperkinetic Projectiles''' to stop incoming meteors.

Firefox13: /* Shields */ Fixed a typo

2023-01-03T15:41:23Z

Shields: Fixed a typo

← Older revision		Revision as of 15:41, 3 January 2023
Line 42:		Line 42:

	* Set '''Field Range''' to maximum possible - '''200'''.		* Set '''Field Range''' to maximum possible - '''200'''.
−	**This ensures that whole ship is covered by shield. Using lower settings is unrecommended as iy may leave parts of ship unprotected.	+	**This ensures that whole ship is covered by shield. Using lower settings is unrecommended as it may leave parts of ship unprotected.
	* Set '''Input Cap''' to something big - '''3000 or 5000''' kW should do.		* Set '''Input Cap''' to something big - '''3000 or 5000''' kW should do.
	** Too low input cap will make shield generator passively lose power.		** Too low input cap will make shield generator passively lose power.

Firefox13: /* Power grid */ Added shield gen image

2023-01-03T15:38:07Z

Power grid: Added shield gen image

← Older revision		Revision as of 15:38, 3 January 2023
Line 13:		Line 13:
	[[File:NewEngine.png\|thumb\|Main Coolant Pipes]]		[[File:NewEngine.png\|thumb\|Main Coolant Pipes]]
	[[File:Engine upper.png\|none\|thumb\|632x632px\|Upper Engine Floor]]		[[File:Engine upper.png\|none\|thumb\|632x632px\|Upper Engine Floor]]
−	#Wrench the '''Plasma''' canisters in the ports marked with <span style="color:#FFA500">'''Orange'''</span> '''(1)''' squares.[[File:Enginenew.png\|thumb\|~~520x520px~~]]	+	#Wrench the '''Plasma''' canisters in the ports marked with <span style="color:#FFA500">'''Orange'''</span> '''(1)''' squares.[[File:Enginenew.png\|thumb\|445x445px\|Waste and Cooling pipes]]
	#*'''Plasma''' is a superior option as it has highest heat capacity. Using other gases is highly unrecommended.		#*'''Plasma''' is a superior option as it has highest heat capacity. Using other gases is highly unrecommended.
	#Max out and turn on the pumps marked in <span style="color:#87CEEB">'''Light Blue'''</span> '''(2)''' so that the gas flows freely through the loops.		#Max out and turn on the pumps marked in <span style="color:#87CEEB">'''Light Blue'''</span> '''(2)''' so that the gas flows freely through the loops.
Line 23:		Line 23:

	This setup ensures that Supermatter is running.		This setup ensures that Supermatter is running.
		+
		+
	==Power grid==		==Power grid==
	Head to the upper floor and interact with the console closest to the switches (<span style="color:#FFA500">'''Orange'''</span>). Exit the Power Monitoring and open RCON Remote Control.		Head to the upper floor and interact with the console closest to the switches (<span style="color:#FFA500">'''Orange'''</span>). Exit the Power Monitoring and open RCON Remote Control.
Line 29:		Line 31:
	** Instead of turning on Engineering substation bypass you can upgrade the '''SMES''' (explained below) unit, located somewhere in lower decks of engineering maintenance. Doing neither is '''highly''' unrecommended - whole ship is powered through Engineering substation.		** Instead of turning on Engineering substation bypass you can upgrade the '''SMES''' (explained below) unit, located somewhere in lower decks of engineering maintenance. Doing neither is '''highly''' unrecommended - whole ship is powered through Engineering substation.
	*Exit the console and interact with SMES units in the room corner (upper right). Max each one's input and output and ensure that they are on.		*Exit the console and interact with SMES units in the room corner (upper right). Max each one's input and output and ensure that they are on.
−	[[File:Rcon.png\|thumb]]	+	[[File:Rcon.png\|thumb\|This is how approximately most of your RCON setups should look once you're done with it.]]


Line 36:		Line 38:

	== Shields ==		== Shields ==
		+	[[File:Shield gen.png\|thumb\|335x335px\|This is how your setup should approximately look once you've done.Logging console registers impacts and remote control coordinates.]]
	Shield generator is located east of the lobby (go on the catwalk, then upstairs and north into airlock dubbed "Generator Room") but it is possible to edit Shield Generator settings using remote control program using one of the upper floor consoles or a laptop.		Shield generator is located east of the lobby (go on the catwalk, then upstairs and north into airlock dubbed "Generator Room") but it is possible to edit Shield Generator settings using remote control program using one of the upper floor consoles or a laptop.

Line 54:		Line 57:

	And finally, press the '''Turn on''' button.		And finally, press the '''Turn on''' button.
		+

	==The Principles==		==The Principles==

Firefox13: /* Shields */ fixed typo

2022-12-28T11:50:58Z

Shields: fixed typo

← Older revision		Revision as of 11:50, 28 December 2022
Line 36:		Line 36:

	== Shields ==		== Shields ==
−	Shield generator is located east of the lobby (go on the catwalk, then upstairs and north into airlock dubbed "Generator Room") but it is possible to edit Shield Generator settings using remote control program using on of the upper floor consoles or a laptop.	+	Shield generator is located east of the lobby (go on the catwalk, then upstairs and north into airlock dubbed "Generator Room") but it is possible to edit Shield Generator settings using remote control program using one of the upper floor consoles or a laptop.

	* Set '''Field Range''' to maximum possible - '''200'''.		* Set '''Field Range''' to maximum possible - '''200'''.

Firefox13: Added some more descriptions

2022-12-28T08:56:16Z

Added some more descriptions

← Older revision		Revision as of 08:56, 28 December 2022
Line 39:		Line 39:

	* Set '''Field Range''' to maximum possible - '''200'''.		* Set '''Field Range''' to maximum possible - '''200'''.
		+	**This ensures that whole ship is covered by shield. Using lower settings is unrecommended as iy may leave parts of ship unprotected.
	* Set '''Input Cap''' to something big - '''3000 or 5000''' kW should do.		* Set '''Input Cap''' to something big - '''3000 or 5000''' kW should do.
	** Too low input cap will make shield generator passively lose power.		** Too low input cap will make shield generator passively lose power.
Line 47:		Line 48:
	** '''Multi-Dimensional Field Warp''' to make shield cover the whole ship instead of single deck.		** '''Multi-Dimensional Field Warp''' to make shield cover the whole ship instead of single deck.
	** '''Atmospheric Containment''' to stop breaches from depressurizing the ship.		** '''Atmospheric Containment''' to stop breaches from depressurizing the ship.
		+
−	*** Most modes are self-explanatory.
		+	Most modes have self-explanatory names, but they also have descriptions.
−	*** Multiplies are power consumption multipliers - if you use many modes it is recommended to set '''Input Cap''' even higher.
		+
		+	Multipliers are power multipliers - having too many modes enabled will make shield generator consume a lot of power.

	And finally, press the '''Turn on''' button.		And finally, press the '''Turn on''' button.

Firefox13: /* Power grid */ Added SMES core swtup

2022-12-28T08:52:57Z

Power grid: Added SMES core swtup

← Older revision		Revision as of 08:52, 28 December 2022
Line 22:		Line 22:
	#Turn on the emitter using one of the switches upstairs or interact with the emitter manually.		#Turn on the emitter using one of the switches upstairs or interact with the emitter manually.

−	This setup ensures that Supermatter is running	+	This setup ensures that Supermatter is running.
	==Power grid==		==Power grid==
	Head to the upper floor and interact with the console closest to the switches (<span style="color:#FFA500">'''Orange'''</span>). Exit the Power Monitoring and open RCON Remote Control.		Head to the upper floor and interact with the console closest to the switches (<span style="color:#FFA500">'''Orange'''</span>). Exit the Power Monitoring and open RCON Remote Control.
Line 28:		Line 28:
	* Set every Substation '''Input to 450 - AUTO''' and '''Output 400 - ONLINE ''EXCEPT''''' Engineering substation - turn on its bypass instead.		* Set every Substation '''Input to 450 - AUTO''' and '''Output 400 - ONLINE ''EXCEPT''''' Engineering substation - turn on its bypass instead.
	** Instead of turning on Engineering substation bypass you can upgrade the '''SMES''' (explained below) unit, located somewhere in lower decks of engineering maintenance. Doing neither is '''highly''' unrecommended - whole ship is powered through Engineering substation.		** Instead of turning on Engineering substation bypass you can upgrade the '''SMES''' (explained below) unit, located somewhere in lower decks of engineering maintenance. Doing neither is '''highly''' unrecommended - whole ship is powered through Engineering substation.
		+	*Exit the console and interact with SMES units in the room corner (upper right). Max each one's input and output and ensure that they are on.
	[[File:Rcon.png\|thumb]]		[[File:Rcon.png\|thumb]]

Firefox13: /* Power grid */

2022-12-27T18:33:21Z

Power grid

← Older revision		Revision as of 18:33, 27 December 2022
Line 27:		Line 27:

	* Set every Substation '''Input to 450 - AUTO''' and '''Output 400 - ONLINE ''EXCEPT''''' Engineering substation - turn on its bypass instead.		* Set every Substation '''Input to 450 - AUTO''' and '''Output 400 - ONLINE ''EXCEPT''''' Engineering substation - turn on its bypass instead.
−	** Instead of turning on Engineering substation bypass you can upgrade the '''SMES''' (explained below) unit. Doing neither is '''highly''' unrecommended - whole ship is powered through Engineering substation.	+	** Instead of turning on Engineering substation bypass you can upgrade the '''SMES''' (explained below) unit, located somewhere in lower decks of engineering maintenance. Doing neither is '''highly''' unrecommended - whole ship is powered through Engineering substation.
	[[File:Rcon.png\|thumb]]		[[File:Rcon.png\|thumb]]

Firefox13: Fixed images

2022-12-27T18:27:19Z

Fixed images

← Older revision		Revision as of 18:27, 27 December 2022
Line 12:		Line 12:
	=Supermatter Setup=		=Supermatter Setup=
	[[File:NewEngine.png\|thumb\|Main Coolant Pipes]]		[[File:NewEngine.png\|thumb\|Main Coolant Pipes]]
−	[[File:~~Enginenew~~.png\|thumb\|~~Waste~~ ~~Control~~]]	+	[[File:Engine upper.png\|none\|thumb\|632x632px\|Upper Engine Floor]]
		⚫	#Wrench the '''Plasma''' canisters in the ports marked with <span style="color:#FFA500">'''Orange'''</span> '''(1)''' squares.[[File:Enginenew.png\|thumb\|520x520px]]
⚫	[[File:~~Engine_upper~~.png\|thumb~~\|Upper Floor~~]]
		⚫	#*'''Plasma''' is a superior option as it has highest heat capacity. Using other gases is highly unrecommended.
⚫	#Wrench the '''Plasma''' canisters in the ports marked with <span style="color:#FFA500">'''Orange'''</span> '''(1)''' squares.
⚫	#*'''Plasma''' is a superior option as it has highest heat capacity. Using other gases highly unrecommended.
	#Max out and turn on the pumps marked in <span style="color:#87CEEB">'''Light Blue'''</span> '''(2)''' so that the gas flows freely through the loops.		#Max out and turn on the pumps marked in <span style="color:#87CEEB">'''Light Blue'''</span> '''(2)''' so that the gas flows freely through the loops.
	#Make sure that omni-filters, shown in <span style="color:#000080">'''Dark Blue'''</span>'''(3)''' squares, do not filter '''Plasma'''. These filters should be in the correct configuration on round start.		#Make sure that omni-filters, shown in <span style="color:#000080">'''Dark Blue'''</span>'''(3)''' squares, do not filter '''Plasma'''. These filters should be in the correct configuration on round start.
Line 23:		Line 22:
	#Turn on the emitter using one of the switches upstairs or interact with the emitter manually.		#Turn on the emitter using one of the switches upstairs or interact with the emitter manually.

		+	This setup ensures that Supermatter is running
−
−
−
	==Power grid==		==Power grid==
	Head to the upper floor and interact with the console closest to the switches (<span style="color:#FFA500">'''Orange'''</span>). Exit the Power Monitoring and open RCON Remote Control.		Head to the upper floor and interact with the console closest to the switches (<span style="color:#FFA500">'''Orange'''</span>). Exit the Power Monitoring and open RCON Remote Control.
Line 31:		Line 28:
	* Set every Substation '''Input to 450 - AUTO''' and '''Output 400 - ONLINE ''EXCEPT''''' Engineering substation - turn on its bypass instead.		* Set every Substation '''Input to 450 - AUTO''' and '''Output 400 - ONLINE ''EXCEPT''''' Engineering substation - turn on its bypass instead.
	** Instead of turning on Engineering substation bypass you can upgrade the '''SMES''' (explained below) unit. Doing neither is '''highly''' unrecommended - whole ship is powered through Engineering substation.		** Instead of turning on Engineering substation bypass you can upgrade the '''SMES''' (explained below) unit. Doing neither is '''highly''' unrecommended - whole ship is powered through Engineering substation.
		⚫	[[File:Rcon.png\|thumb]]
		+
		+
		+
		+

	== Shields ==		== Shields ==

Firefox13: rewrote it somewhat, made it better

2022-12-27T18:22:56Z

rewrote it somewhat, made it better

← Older revision		Revision as of 18:22, 27 December 2022
Line 12:		Line 12:
	=Supermatter Setup=		=Supermatter Setup=
	[[File:NewEngine.png\|thumb\|Main Coolant Pipes]]		[[File:NewEngine.png\|thumb\|Main Coolant Pipes]]
−	[[File:~~NewEngine2~~.png\|thumb\|Waste Control]]	+	[[File:Enginenew.png\|thumb\|Waste Control]]
	[[File:Engine_upper.png\|thumb\|Upper Floor]]		[[File:Engine_upper.png\|thumb\|Upper Floor]]
	#Wrench the '''Plasma''' canisters in the ports marked with <span style="color:#FFA500">'''Orange'''</span> '''(1)''' squares.		#Wrench the '''Plasma''' canisters in the ports marked with <span style="color:#FFA500">'''Orange'''</span> '''(1)''' squares.
		+	#*'''Plasma''' is a superior option as it has highest heat capacity. Using other gases highly unrecommended.
	#Max out and turn on the pumps marked in <span style="color:#87CEEB">'''Light Blue'''</span> '''(2)''' so that the gas flows freely through the loops.		#Max out and turn on the pumps marked in <span style="color:#87CEEB">'''Light Blue'''</span> '''(2)''' so that the gas flows freely through the loops.
	#Make sure that omni-filters, shown in <span style="color:#000080">'''Dark Blue'''</span>'''(3)''' squares, do not filter '''Plasma'''. These filters should be in the correct configuration on round start.		#Make sure that omni-filters, shown in <span style="color:#000080">'''Dark Blue'''</span>'''(3)''' squares, do not filter '''Plasma'''. These filters should be in the correct configuration on round start.
Line 25:		Line 26:


−	==Power grid ==	+	==Power grid==
−	Head to the upper floor and interact with the console closest to the switches (~~marked~~ <span style="color:#FFA500">'''Orange'''</span>	+	Head to the upper floor and interact with the console closest to the switches (<span style="color:#FFA500">'''Orange'''</span>). Exit the Power Monitoring and open RCON Remote Control.
		+
−	[[File:Rcon.png\|thumb\|Right\|This how your RCON setup should look on most SMES units]]
		+	* Set every Substation '''Input to 450 - AUTO''' and '''Output 400 - ONLINE ''EXCEPT''''' Engineering substation - turn on its bypass instead.
⚫	~~Basic~~ Principles
		+	** Instead of turning on Engineering substation bypass you can upgrade the '''SMES''' (explained below) unit. Doing neither is '''highly''' unrecommended - whole ship is powered through Engineering substation.
⚫	=== The Generators===
		+
⚫	[[File:TEGworking.gif\|thumb\|right\|A TEG at ~~work~~.]]
		+	== Shields ==
		+	Shield generator is located east of the lobby (go on the catwalk, then upstairs and north into airlock dubbed "Generator Room") but it is possible to edit Shield Generator settings using remote control program using on of the upper floor consoles or a laptop.
		+
		+	* Set '''Field Range''' to maximum possible - '''200'''.
		+	* Set '''Input Cap''' to something big - '''3000 or 5000''' kW should do.
		+	** Too low input cap will make shield generator passively lose power.
		+	* Turn on the following modesː
		+	** '''Hyperkinetic Projectiles''' to stop incoming meteors.
		+	** '''Unknown Lifeforms''' to stop angry mobs.
		+	** '''Hull Shielding''' to make shield envelop the ship instead of projecting a large bubble.
		+	** '''Multi-Dimensional Field Warp''' to make shield cover the whole ship instead of single deck.
		+	** '''Atmospheric Containment''' to stop breaches from depressurizing the ship.
		+	*** Most modes are self-explanatory.
		+	*** Multiplies are power consumption multipliers - if you use many modes it is recommended to set '''Input Cap''' even higher.
		+
		+	And finally, press the '''Turn on''' button.
		+
		⚫	==The Principles==
		+
		⚫	===The Generators===
		⚫	[[File:TEGworking.gif\|thumb\|right\|A TEG during setup. Note the turbines spinning slowly.]]
	The core power generation is done by the Thermo-Electric Generators (TEGs). There are four in the engine, and they are powered by the flow of two gasses of differing temperature through their two sides. The larger the temperature difference, the more power generated. Note that they are less efficient when generating more than 500kW, but are not harmed by doing so, despite the intermittent sparks generated.		The core power generation is done by the Thermo-Electric Generators (TEGs). There are four in the engine, and they are powered by the flow of two gasses of differing temperature through their two sides. The larger the temperature difference, the more power generated. Note that they are less efficient when generating more than 500kW, but are not harmed by doing so, despite the intermittent sparks generated.

−	===Gas Loops ===	+	===Gas Loops===
	There are two gas loops in the engine, the cold loop and the hot loop. By mixing in the generator, the temperature of the gasses are equalized somewhat, so the hotter gas should be reheated, and the cooler gas should be cooled. This is where the supermatter comes in. The cold loop flows from red pipe, to generators, to the green pipe, then out to radiators in space to cool back down. The hot loop flows from yellow pipe, to blue pipe, then into the supermatter chamber to be reheated. The supermatter, when excited, produces a large amount of heat, and will probably burn some of the plasma in the hot loop. In order to remove the products of this combustion, everything except plasma is filtered from the hot loop.		There are two gas loops in the engine, the cold loop and the hot loop. By mixing in the generator, the temperature of the gasses are equalized somewhat, so the hotter gas should be reheated, and the cooler gas should be cooled. This is where the supermatter comes in. The cold loop flows from red pipe, to generators, to the green pipe, then out to radiators in space to cool back down. The hot loop flows from yellow pipe, to blue pipe, then into the supermatter chamber to be reheated. The supermatter, when excited, produces a large amount of heat, and will probably burn some of the plasma in the hot loop. In order to remove the products of this combustion, everything except plasma is filtered from the hot loop.
	Oxygen in the hot loop is a very bad idea - it leads to fires, which can rapidly raise the core temperature to dangerous levels.		Oxygen in the hot loop is a very bad idea - it leads to fires, which can rapidly raise the core temperature to dangerous levels.

−	=== Notes===	+	===Notes===

	The plasma setup can withstand EER up to 1500+. You can simply just leave emitter on since it's bottlenecks at ~1400. Setups with other gases aren't as safe - you'll want to do a few shots, maybe 6-12 depending on the gas.		The plasma setup can withstand EER up to 1500+. You can simply just leave emitter on since it's bottlenecks at ~1400. Setups with other gases aren't as safe - you'll want to do a few shots, maybe 6-12 depending on the gas.
Line 43:		Line 65:
	TEG power output depends on the difference between the temperature of the loops, and the heat capacity of the gas mix in the loops. While the hot loop doesn't get particularly hot with a pure plasma setup, it still generates vastly more power due to the high heat capacity, meaning it's bother safer and outputs more energy.		TEG power output depends on the difference between the temperature of the loops, and the heat capacity of the gas mix in the loops. While the hot loop doesn't get particularly hot with a pure plasma setup, it still generates vastly more power due to the high heat capacity, meaning it's bother safer and outputs more energy.

		+	If you want to upgrade a SMES [[File:SMES.png\|32x32px]] unit, follow the guide belowː
−	It's also a good idea to upgrade the two SMES units (the ones side by side in the computer picture) using the parts in one of the crates south of them. Otherwise tinkering with shield input power could prevent needed substations from getting proper power applied. To upgrade them, follow the small guide below.[[File:SMES.png]]

	*Turn off the charge mode for both SMES units and wait for it to hit zero.		*Turn off the charge mode for both SMES units and wait for it to hit zero.
−	*Power off the SMES unit completely and open the maintenance hatch with a screwdriver	+	* Power off the SMES unit completely and open the maintenance hatch with a screwdriver
−	* Stuff one of each of the given SMES coils into both units	+	*Stuff one of each of the given SMES coils into both units
−	*Close the maintenance hatch	+	* Close the maintenance hatch
−	*Power on both SMES and max out both the charge and output levels	+	* Power on both SMES and max out both the charge and output levels

	Remember to download the shield modification program to turn on the shields and explore the extra options as well as tinkering with the input cap. Enabling the engineering section bypass allows the SMES units to charge the shields much faster, and is recommended - but it might be best left till later, as it can be a bit of a power hog while it charges to maximum capacity.		Remember to download the shield modification program to turn on the shields and explore the extra options as well as tinkering with the input cap. Enabling the engineering section bypass allows the SMES units to charge the shields much faster, and is recommended - but it might be best left till later, as it can be a bit of a power hog while it charges to maximum capacity.

−	Entering the lower floor once the engine has started should be avoided unless absolutely necessary - the supermatter emits an ~~EXTREME amount~~ of radiation~~, and it's even been seen to penetrate full protection~~.	+	Entering the lower floor once the engine has started should be avoided unless absolutely necessary - the supermatter emits '''serious''' amounts of radiation.

	===Fighting the Delamination===		===Fighting the Delamination===
Line 61:		Line 83:
	*Plasma fire tends to rapidly accelerate the delam process. It is advisable to keep oxygen as far away as possible from the SM. If not shut down or welded, the air pumps in the engine room will perpetually pump more O2 to fuel the fire.		*Plasma fire tends to rapidly accelerate the delam process. It is advisable to keep oxygen as far away as possible from the SM. If not shut down or welded, the air pumps in the engine room will perpetually pump more O2 to fuel the fire.
	*The engine room SMES running out of power is a near death sentence - the blast doors will no longer move, the powered pipes will not work, and the emitter will not fire. Use the Pacman in the engine room by wrenching it onto a wire knot, but watch out for overheat.		*The engine room SMES running out of power is a near death sentence - the blast doors will no longer move, the powered pipes will not work, and the emitter will not fire. Use the Pacman in the engine room by wrenching it onto a wire knot, but watch out for overheat.
−	* In atmos, there is a pipe labelled "n2 to core." This pipe will be able to pump large amounts of n2 straight into the SM which will abate all but the worst delams. However, atmos runs out of power very fast and is a distance away from the SM.	+	*In atmos, there is a pipe labelled "n2 to core." This pipe will be able to pump large amounts of n2 straight into the SM which will abate all but the worst delams. However, atmos runs out of power very fast and is a distance away from the SM.

−	= The Thrusters=	+	=The Thrusters=

	The CEV "Eris" is a space ship. It may not look like it, but it is. To fly through space it obviously needs thrusters, these thrusters are maintained by the Technomancers aboard. There are two thruster rooms for both sets of thrusters aboard the ship. For the inevitable Captain who may fly the ship without understanding his ship, your job will be to maintain them.		The CEV "Eris" is a space ship. It may not look like it, but it is. To fly through space it obviously needs thrusters, these thrusters are maintained by the Technomancers aboard. There are two thruster rooms for both sets of thrusters aboard the ship. For the inevitable Captain who may fly the ship without understanding his ship, your job will be to maintain them.
Line 72:		Line 94:
	==Refueling==		==Refueling==

−	When the time comes of CEV "Eris" drifting through space, you will need to refuel the thrusters immediately, lest you hear the ominous announcements of Meteor's incoming forever. Before getting started, know the color coding for the following images.	+	When the time comes of CEV "Eris" drifting through space, you will need to refuel the thrusters immediately, lest you hear the ominous announcements of Meteor's incoming forever. Before getting started, know the color coding for the following images.

	*Red: Your fuel		*Red: Your fuel
−	*Light Blue: Main Pump	+	* Light Blue: Main Pump
−	*Blue: Vent Pump	+	* Blue: Vent Pump
−	*Pink: Fuel Valve	+	* Pink: Fuel Valve

	[[file:ThrustersOne.png\|left\|300px\|thumb\|Thruster One]]		[[file:ThrustersOne.png\|left\|300px\|thumb\|Thruster One]]
Line 98:		Line 120:
	'''Note: Do not open the canister if it is not wrenched to a connector port unless you want to release plasma into the air'''		'''Note: Do not open the canister if it is not wrenched to a connector port unless you want to release plasma into the air'''

−	=Tips=	+	=Tips =

−	* Should you accidentally unwrench the Emitter, simply wrench it back in place and weld it onto the platform. It should work again.	+	*Should you accidentally unwrench the Emitter, simply wrench it back in place and weld it onto the platform. It should work again.
	*Opening the 'Waste to Space' valve in the Engine room can offset the issue of the waste canister getting full.		*Opening the 'Waste to Space' valve in the Engine room can offset the issue of the waste canister getting full.
	*Placing the shield on atmospheric containment can alleviate many issue when someone create holes in the ship and reduce the need of using inflatables.		*Placing the shield on atmospheric containment can alleviate many issue when someone create holes in the ship and reduce the need of using inflatables.

Firefox13: working on a better guide

2022-12-27T18:02:25Z

working on a better guide

Show changes