User:Nullaurelian/Pulsar Engine ErisEN Draft

The CEV Eris is powered by a remote satellite orbiting a hazardous Pulsar. Due to the gravitational forces generated by the star, the satellite is in constant danger of falling in and spewing the raw radiation of the star through the Eris itself. As such the local tribe of Technomancers are charged with maintaining the orbit of this satellite, balancing the power it generates with the threat of stellar fire consuming the ship.

Stellar Bridge

The CEV Eris receives power from the Pulsar Satellite via the Stellar Bridge. The Stellar Bridge connects to the main SMES coils in the ship's engineering section and it's output can be measured by the number of active conduits on the bridge. The bridge may produce more power than the SMES can absorb, so it is recommended to upgrade the SMES components when possible.

Upgrading the SMES

The engineering section contains the materials necessary to fully upgrade 2 SMES devices. By upgrading the SMES machines, engineering can store and process more power from connected power sources.

To upgrade the SMES, follow these steps:

1. Disable power input and set the SMES to fully drain.
2. Once fully drained, disable the power output.
3. Open the SMES with a tool with the screw driving trait.
4. Place in one of each SMES, SMES capacitance and SMES transmission coil into the SMES.
5. Close the SMES with a tool with the screw driving trait.
6. Re-enable power input and output, setting the limits as desired.

It is possible to bypass the SMES draining steps by disabling the SMES safety circuit, however doing so may cause the SMES to explode with a force equal to the amount of power stored in the SMES at the time.

RCON and Breaker Bypasses

Power flow is governed by the RCON power management program. RCON dictates the maximum amount of power that each section receives assuming that there is enough power to supply all sections. Some sections of the ship, such as the sections used by Moebius and Aster's will use large amounts of power and should be allocated more than normal to prevent blackouts.

An alternative to setting RCON values is to set the grid to bypass the breaker boxes for the section to feed it directly from the power generators. Doing so effectively means unlimited power for that section but also increases the load that section has on the overall ship power grid.

Pulsar Satellite

The Pulsar satellite is a remote location off the CEV Eris, connected by the fragile link of the Stellar Bridge and the portal in the Engineering section of the Eris.

Satellite Management

The satellite is controlled by it's navigation console. From here Technomancers can set the distance and relative location the satellite orbits the Pulsar.

Satellite Thrust

The Satellite requires an input of gaseous Plasma to maintain it's orbit. The satellite starts with a limited supply but requires resupply from the Eris's atmospheric station to actively make large adjustments to the satellite's location.

Solar Shielding

The Satellite skims a percentage of the produced energy as solar shielding to prevent it's crew from being cooked by the Pulsar's radiation. The amount of power skimmed scales with the distance to the star - the closer the satellite is to the star the more power it produces but also the more power it requires to power the solar shields.

Disaster Recovery

The Satellite is always at risk of having it's orbit decay into the star or running into the intense beams of radiation that the Pulsar puts out. When the Satellite runs into either of terrain features, the CEV Eris will feel the burning wrath of the star. The overloaded energy grid will dump excess radiation randomly all over the ship, irradiating and eventually disassembling the ship.