Surgery ErisEn

Preparation for surgery

• Put on your surgical mask and latex gloves.
• Put your patient in the body scanner (click+drag them) to see what's wrong.
• Undress your patient and put him on an operating table.
• Wrench an anesthesia canister to the IV/Tank roller.
• Cover the patient with the anesthesia mask (Click+Drag from tank to patient)
• Make sure you're on HELP intent.
• Begin operation.

Note: Using the patient console screen will identify if the patient is stable or not.

Bone Surgery	Internal Bleeding	Internal Organ
Scan your patient to find what bones to fix Aim at the broken limb with the bottom-right puppet. Use scalpel to make an incision. Use hemostat to stop bleeding. Use retractor to keep the incision open. Use retractor again to remove shards of broken bone. Use bonesetter to set the bone. Use bonesetter again to finish setting. Use cautery to close the incision. Done.	Scan your patient to find where to stop bleeding Aim at the harmed limb with the bottom-right puppet. Use scalpel to make an incision. Use hemostat to stop bleeding. Caution: you do not need this step if you are operating on the head. Use retractor to keep the incision open. (Torso/head) Use a circular saw to open the cavity. (Torso/head) Hold it open with a retractor. Use hemostat to stop the internal bleeding. Use cautery to close the incision. Done.	Scan your patient to find what organ Aim at the harmed limb with the bottom-right puppet. Use scalpel to make an incision. Use hemostat to stop bleeding. (Torso/head) Use a circular saw to open the cavity. (Torso/head) Hold it open with a retractor. Use Advanced Trauma Kit on harmed organ, or nanopaste if organ is robotic. (Torso/head) Use retractor to close the cavity. (Torso/head) Use bonesetter to repair the cavity. Use cautery to close the incision. Done.

Bone recovery

Make sure your patient's limb is already healed enough so it won't instantly break again.

• Prepare for operation, scan your patient.
• Aim at the broken limb with the bottom-right puppet.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding.
• Use retractor to keep the incision open.
• Use retractor again to remove shards of broken bone.
• Use bonesetter to set the bone.
• Use bonesetter again to finish setting.
• Use cautery to close the incision. Done.

Stopping internal bleeding

• Prepare for operation, scan your patient.
• Aim at the harmed limb with the bottom-right puppet.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding. Caution: you do not need this step if you are operating on the head.
• Use retractor to keep the incision open.
• (Torso/head) Use a circular saw to open the cavity.
• (Torso/head) Hold it open with a retractor.
• Use hemostat to stop the internal bleeding.
• Use cautery to close the incision. Done.

Internal organs surgery

• Prepare for operation, scan your patient.
• Aim at the harmed limb with the bottom-right puppet.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding.
• (Torso/head) Use a circular saw to open the cavity.
• (Torso/head) Hold it open with a retractor.
• Use Advanced Trauma Kit on harmed organ, or nanopaste if organ is robotic.
• (Torso/head) Use retractor to close the cavity.
• (Torso/head) Use bonesetter to repair the cavity.
• Use cautery to close the incision. Done.

Removing of a bullet/shrapnel

• Prepare for operation, scan your patient.
• Aim at the harmed limb with the bottom-right puppet.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding. Caution: you do not need this step if you are operating on the head.
• Use retractor to keep the incision open.
• (Torso/head) Use circular saw to open the cavity.
• (Torso/head) Hold it open with a retractor.
• Use hemostat to remove the foreign object. This may take several tries.
• (Torso/head) Using retractor, close the cavity.
• (Torso/head) Use bonesetter to repair the cavity.
• Use cautery to close the incision. Done.

Face recovery

• Prepare for operation.
• Aim at the patient's mouth.
• Use scalpel to make an incision.
• Use hemostat to repair vocal cords.
• Use retractor to repair skin.
• Use cautery to close the incision. Done.

Amputation

• Use HELP intent.
• Prepare for operation.
• Aim for the harmed limb.
• Use circular saw to amputate.
• Done. Use Advanced Trauma Kit on the body part leading to the limb to stop bleeding, if you care.

Implantation of organ modules

• Prepare for operation.
• Aim at target cavity.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding. Caution: you do not need this step if you are operating on the head.
• Use retractor to keep the incision open.
• (Torso/head) Use circular saw to open the cavity.
• (Torso/head) Use retractor to keep it open.
• Use surgical drill to prepare the cavity for implantation.
• Carefully put an implant in the cavity.
• Use cautery to connect organ module to the cavity's muscles.
• (Torso/head) Using retractor, close the cavity.
• (Torso/head) Use bonesetter to repair the cavity.
• Use cautery to close the incision. Done.

Internal organs removal and transplantation

• Prepare for operation.
• Head contains brain, eyes, and nervous system.
• Torso contains heart, lungs, and liver.
• Groin contains kidneys and appendix.
• Aim for chosen area.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding.
• Use retractor to keep the incision open
• (Torso/head) Use circular saw to open the cavity.
• (Torso/head) Use retractor to keep it open.
• Use scalpel to separate the organ.
• Use hemostat to remove it. Caution: if you want to use this organ for transplantation, place in fridge. For cyborgization, place brain in an MMI.
• (COMPLETING ORGAN REMOVAL OPERATION)(Torso/head) Use retractor to close the cavity.
• Use bonesetter to fix the cavity.
• Use cautery to close the incision. Done.
• (THE BEGINNING OF THE TRANSPLANTATION) Complete first three (five for torso/head) steps.
• Place the organ into the cavity.
• Use hemostat to connect organ.
• (Torso/head) Use retractor to close the cavity.
• (Torso/head) Use bonesetter to repair the cavity.
• Use Advanced Trauma Kit/nanopaste if necessary.
• Use cautery to close the incision. Done.

RIG removal from a corpse

• Put the body on the operating table.
• Aim at the torso.
• Use welding tool or circular saw to open the RIG.
• Remove RIG's control module from the back.

Autopsy

• Use scalpel on all areas you want to scan.
• Use autopsy scanner on all areas you want to scan.
• Print report by clicking on autopsy scanner.