Difference between revisions of "Surgery ErisEn"

From Discordia
Jump to: navigation, search
m (Add Russian interlanguage link)
Line 182: Line 182:
 
*If the damage is too severe, then place your patient on a table.
 
*If the damage is too severe, then place your patient on a table.
 
*Use a 'Screwdriver' to unscrew the hatch on robotic limb.
 
*Use a 'Screwdriver' to unscrew the hatch on robotic limb.
*Use a 'Crowbar' to open the hatch.
 
 
*Use the 'Welder' again to repair internal damage.
 
*Use the 'Welder' again to repair internal damage.
 
*Use 'Cable Coil' again to rewire important parts.
 
*Use 'Cable Coil' again to rewire important parts.
*Finally, use the 'Crowbar' again to close the hatch.
+
*Finally, use the 'Screwdriver' again to close the hatch.
 
| '''Organic Limbs'''
 
| '''Organic Limbs'''
 
*Open an incision with a 'Scalpel'
 
*Open an incision with a 'Scalpel'
Line 191: Line 190:
 
(skip above if using laser scalpel)
 
(skip above if using laser scalpel)
 
*Open the incision with a 'Retractor'
 
*Open the incision with a 'Retractor'
*Install the arm augment(Armblade,tools,mechanical muscles etc.)
+
*Install the arm augment(Armblade,tools,mechanical muscles etc.) by clicking "Insert"
 
*Close the incision with a 'Cauterizer'
 
*Close the incision with a 'Cauterizer'
 
'''Robotic Limbs'''
 
'''Robotic Limbs'''
 
*Use the 'Screwdriver' to unscrew the hatch.
 
*Use the 'Screwdriver' to unscrew the hatch.
 
*"Insert" the augment.
*Use the 'Crowbar' to open the hatch.
 
 
*Use the 'Screwdriver' again to close the hatch.
*Install the augment.
 
*Use the 'Crowbar' again to close the hatch.
 
 
| '''Chest(Subdermal Armour)'''
 
| '''Chest(Subdermal Armour)'''
 
*Open an incision with a 'Scalpel'
 
*Open an incision with a 'Scalpel'
Line 203: Line 201:
 
(skip above if using laser scalpel)
 
(skip above if using laser scalpel)
 
*Open the incision with a 'Retractor'
 
*Open the incision with a 'Retractor'
*Install the augmentation.
+
*Insert the augmentation.
 
*Use the 'Retractor' again to remove bone shards.
 
*Use the 'Retractor' again to remove bone shards.
 
*Close the incision with a 'Cauterizer'
 
*Close the incision with a 'Cauterizer'

Revision as of 23:53, 27 November 2019

Preparation for surgery

  • Put on your surgical mask and latex gloves.
  • Put your patient in the body scanner (click+drag them) to see what's wrong.
  • Undress your patient and put him on an operating table.
  • Wrench an anesthesia canister to the IV/Tank roller.
  • Cover the patient with the anesthesia mask (Click+Drag from tank to patient)
  • Make sure you're on HELP intent.
  • Begin operation.

Note: Using the patient console screen will identify if the patient is stable or not.

Internal Organ Repair Internal Bleeding (Head/Chest) Internal Bleeding (Limbs)
Scan your patient.
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Cut open the skull/ribs with a 'Saw'
  • Move the ribs/skull out of the way with a 'Retractor'
  • Apply 'Advanced Trauma Kits' to repair organic organs and 'Nanopaste' for mechanical ones
  • If decaying, apply 'Peridaxon' with a dropper tool.

To close incision

  • Move the ribs/skull back into place with a 'Retractor'
  • Repair the damaged bone with a 'Bonemender'
  • Remove bone shards with a 'Retractor'
  • Close the incision with a 'Cauterizer'
Scan your patient.
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Cut open the skull/ribs with a 'Saw'
  • Move the ribs/skull out of the way with a 'Retractor'
  • Use a 'Hemostat' to repair damaged arteries

To close incision

  • Move the ribs/skull back into place with a 'Retractor'
  • Repair the damaged bone with a 'Bonemender'
  • Remove bone shards with a 'Retractor'
  • Close the incision with a 'Cauterizer'
Scan your patient
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Use a 'Hemostat' to repair damaged arteries

To close incision

  • Close the incision with a 'Cauterizer'
Bone Repair/Mending Foreign Object Removal Organ Transplant/Removal
Scan your patient.
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Remove bone shards with a 'Retractor'
  • Repair the damaged bone with a 'Bonemender'
  • Remove bone shards with a 'Retractor'

To close incision

  • Close the incision with a 'Cauterizer'
Scan your patient.
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Search for foreign bodies with a 'Hemostat'
  • Search until no foreign bodies remain.

To close incision

  • Close the incision with a 'Cauterizer'
Scan your patient
  • Open an incision with 'Scalpel'
  • Stem the bleeding with 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with 'Retractor'
  • Cut open the skull/ribs with 'Saw'
  • Move the ribs/skull out of the way with 'Retractor'
  • Cut the selected organ free with 'Scalpel'
  • Remove the loose organ with 'Hemostat'
  • If adding organ, insert directly
  • Attach organ with 'Cauterizer'

To close incision

  • Move the ribs/skull back into place with 'Retractor'
  • Repair the damaged bone with 'Bonemender'
  • Remove bone shards with 'Retractor'
  • Close incision with 'Cauterizer'
Facial Recovery Limb Amputation Body Implantation
Aim for the patient's mouth.
  • Use 'scalpel' to make an incision.
  • Use 'hemostat' to repair vocal cords.
  • Use 'retractor' to repair skin.

To close incision

  • Close incision with 'Cauterizer'
Aim for specific limb.
  • Use 'HELP' intent.
  • Use 'circular saw' to amputate.
  • Use 'Advanced Trauma Kit' to stop bleeding
Planting the Bomb...
  • Aim at target cavity
  • Open an incision with 'Scalpel'
  • Stem the bleeding with 'Hemostat'

(skip above if using laser scalpel or operating on head)

  • Open the incision with 'Retractor'
  • Cut open the skull/ribs with 'Saw'
  • Move the ribs/skull out of the way with 'Retractor'
  • Use 'Surgical Drill' to prepare for implanting
  • Carefully put an implant in the cavity
  • Use 'Cauterizer' to connect organ module to the cavity's muscles

To close incision

  • Move the ribs/skull back into place with 'Retractor'
  • Repair the damaged bone with 'Bonemender'
  • Remove bone shards with 'Retractor'
  • Close incision with 'Cauterizer'

Maintenance.png


Internal organs removal and transplantation

  • Prepare for operation.
  • Head contains brain, eyes, and nervous system.
  • Torso contains heart, lungs, and liver.
  • Groin contains kidneys and appendix.
  • Aim for chosen area.
  • Use scalpel to make an incision.
  • Use hemostat to stop bleeding.
  • Use retractor to keep the incision open
  • (Torso/head) Use circular saw to open the cavity.
  • (Torso/head) Use retractor to keep it open.
  • Use scalpel to separate the organ.
  • Use hemostat to remove it. Caution: if you want to use this organ for transplantation, place in fridge. For cyborgization, place brain in an MMI.
  • (COMPLETING ORGAN REMOVAL OPERATION)(Torso/head) Use retractor to close the cavity.
  • Use bonesetter to fix the cavity.
  • Use cautery to close the incision. Done.
  • (THE BEGINNING OF THE TRANSPLANTATION) Complete first three (five for torso/head) steps.
  • Place the organ into the cavity.
  • Use hemostat to connect organ.
  • (Torso/head) Use retractor to close the cavity.
  • (Torso/head) Use bonesetter to repair the cavity.
  • Use Advanced Trauma Kit/nanopaste if necessary.
  • Use cautery to close the incision. Done.

RIG removal from a corpse

  • Put the body on the operating table.
  • Aim at the torso.
  • Use welding tool or circular saw to open the RIG.
  • Remove RIG's control module from the back.

Autopsy

  • Use scalpel on all areas you want to scan.
  • Use autopsy scanner on all areas you want to scan.
  • Print report by clicking on autopsy scanner.

Robotics Related Surgery(Augmentations)

Robotic Limb Repair Installing Limb Augmentations Installing Chest.
Scan your patient
  • Use a 'Welder' on the robotic limb in case of dents.
  • Use a 'Cable Coil' to repair burned wires.
  • If the damage is too severe, then place your patient on a table.
  • Use a 'Screwdriver' to unscrew the hatch on robotic limb.
  • Use the 'Welder' again to repair internal damage.
  • Use 'Cable Coil' again to rewire important parts.
  • Finally, use the 'Screwdriver' again to close the hatch.
Organic Limbs
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Install the arm augment(Armblade,tools,mechanical muscles etc.) by clicking "Insert"
  • Close the incision with a 'Cauterizer'

Robotic Limbs

  • Use the 'Screwdriver' to unscrew the hatch.
  • "Insert" the augment.
  • Use the 'Screwdriver' again to close the hatch.
Chest(Subdermal Armour)
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Insert the augmentation.
  • Use the 'Retractor' again to remove bone shards.
  • Close the incision with a 'Cauterizer'
Back to Guide Page