Surgery ErisEn

Preparation for surgery

• Put on your surgical mask and latex gloves.
• Put your patient in the body scanner (click+drag them) to see what's wrong.
• Undress your patient and put him on an operating table.
• Wrench an anesthesia canister to the IV/Tank roller.
• Cover the patient with the anesthesia mask (Click+Drag from tank to patient)
• Make sure you're on HELP intent.
• Begin operation.

Note: Using the patient console screen will identify if the patient is stable or not.

Internal Organ	Internal Bleeding (Head/Chest)	Internal Bleeding (Limbs)
Scan your patient. Open an incision with a 'Scalpel' Stem the bleeding with a 'Hemostat' (skip if using laser scalpel) Open the incision with a 'Retractor' Cut open the skull/ribs with a 'Saw' Move the ribs/skull out of the way with a 'Retractor' Apply 'Advanced Trauma Kits' to repair organic organs and 'Nanopaste' for mechanical ones If decaying, apply 'Peridaxon' with a dropper tool. To close incision Move the ribs/skull back into place with a 'Retractor' Repair the damaged bone with a 'Bonemender' Remove bone shards with a 'Retractor' Close the incision with a 'Cauterizer'	Scan your patient. Open an incision with a 'Scalpel' Stem the bleeding with a 'Hemostat' (skip above using laser scalpel) Open the incision with a 'Retractor' Cut open the skull/ribs with a 'Saw' Move the ribs/skull out of the way with a 'Retractor' Use a 'Hemostat' to repair damaged arteries To close incision Move the ribs/skull back into place with a 'Retractor' Repair the damaged bone with a 'Bonemender' Remove bone shards with a 'Retractor' Close the incision with a 'Cauterizer'	Scan your patient Open an incision with a 'Scalpel' Stem the bleeding with a 'Hemostat' (skip above using laser scalpel) Open the incision with a 'Retractor' Use a 'Hemostat' to repair damaged arteries To close incision Close the incision with a 'Cauterizer'

Bone recovery

Make sure your patient's limb is already healed enough so it won't instantly break again.

• Prepare for operation, scan your patient.
• Aim at the broken limb with the bottom-right puppet.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding.
• Use retractor to keep the incision open.
• Use retractor again to remove shards of broken bone.
• Use bonesetter to set the bone.
• Use bonesetter again to finish setting.
• Use cautery to close the incision. Done.

Stopping internal bleeding

• Prepare for operation, scan your patient.
• Aim at the harmed limb with the bottom-right puppet.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding. Caution: you do not need this step if you are operating on the head.
• Use retractor to keep the incision open.
• (Torso/head) Use a circular saw to open the cavity.
• (Torso/head) Hold it open with a retractor.
• Use hemostat to stop the internal bleeding.
• Use cautery to close the incision. Done.

Internal organs surgery

• Prepare for operation, scan your patient.
• Aim at the harmed limb with the bottom-right puppet.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding.
• (Torso/head) Use a circular saw to open the cavity.
• (Torso/head) Hold it open with a retractor.
• Use Advanced Trauma Kit on harmed organ, or nanopaste if organ is robotic.
• (Torso/head) Use retractor to close the cavity.
• (Torso/head) Use bonesetter to repair the cavity.
• Use cautery to close the incision. Done.

Removing of a bullet/shrapnel

• Prepare for operation, scan your patient.
• Aim at the harmed limb with the bottom-right puppet.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding. Caution: you do not need this step if you are operating on the head.
• Use retractor to keep the incision open.
• (Torso/head) Use circular saw to open the cavity.
• (Torso/head) Hold it open with a retractor.
• Use hemostat to remove the foreign object. This may take several tries.
• (Torso/head) Using retractor, close the cavity.
• (Torso/head) Use bonesetter to repair the cavity.
• Use cautery to close the incision. Done.

Face recovery

• Prepare for operation.
• Aim at the patient's mouth.
• Use scalpel to make an incision.
• Use hemostat to repair vocal cords.
• Use retractor to repair skin.
• Use cautery to close the incision. Done.

Amputation

• Use HELP intent.
• Prepare for operation.
• Aim for the harmed limb.
• Use circular saw to amputate.
• Done. Use Advanced Trauma Kit on the body part leading to the limb to stop bleeding, if you care.

Implantation of organ modules

• Prepare for operation.
• Aim at target cavity.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding. Caution: you do not need this step if you are operating on the head.
• Use retractor to keep the incision open.
• (Torso/head) Use circular saw to open the cavity.
• (Torso/head) Use retractor to keep it open.
• Use surgical drill to prepare the cavity for implantation.
• Carefully put an implant in the cavity.
• Use cautery to connect organ module to the cavity's muscles.
• (Torso/head) Using retractor, close the cavity.
• (Torso/head) Use bonesetter to repair the cavity.
• Use cautery to close the incision. Done.

Internal organs removal and transplantation

• Prepare for operation.
• Head contains brain, eyes, and nervous system.
• Torso contains heart, lungs, and liver.
• Groin contains kidneys and appendix.
• Aim for chosen area.
• Use scalpel to make an incision.
• Use hemostat to stop bleeding.
• Use retractor to keep the incision open
• (Torso/head) Use circular saw to open the cavity.
• (Torso/head) Use retractor to keep it open.
• Use scalpel to separate the organ.
• Use hemostat to remove it. Caution: if you want to use this organ for transplantation, place in fridge. For cyborgization, place brain in an MMI.
• (COMPLETING ORGAN REMOVAL OPERATION)(Torso/head) Use retractor to close the cavity.
• Use bonesetter to fix the cavity.
• Use cautery to close the incision. Done.
• (THE BEGINNING OF THE TRANSPLANTATION) Complete first three (five for torso/head) steps.
• Place the organ into the cavity.
• Use hemostat to connect organ.
• (Torso/head) Use retractor to close the cavity.
• (Torso/head) Use bonesetter to repair the cavity.
• Use Advanced Trauma Kit/nanopaste if necessary.
• Use cautery to close the incision. Done.

RIG removal from a corpse

• Put the body on the operating table.
• Aim at the torso.
• Use welding tool or circular saw to open the RIG.
• Remove RIG's control module from the back.

Autopsy

• Use scalpel on all areas you want to scan.
• Use autopsy scanner on all areas you want to scan.
• Print report by clicking on autopsy scanner.