Surgery ErisEn

From Discordia
Jump to: navigation, search

Preparation for surgery

When preparing for surgery you want to make sure your hands are clean and you are wearing the proper gear. Below is a simple guide to prepare yourself for surgery.

  • Place your patient into the Body Scanner to determine what needs repair.
  • Put on your surgical mask and latex gloves to prevent infection during surgery.
  • Place your patient onto the Operating Table and remove their clothing.
  • Open the Anesthetics Closet and grab the Wrench and a tank.
  • Wrench the Anesthetics tank onto the medical stand.
  • Cover the patient with the anesthesia mask (Click+Drag from tank to patient)
  • Click on the tank and open the valve to put them to sleep.
  • Make sure you are in the HELP Intent.

You are now ready to begin surgery.

Note: The Patient Monitoring Console will tell you your patient's status and if they are alive along with their damage status of Brute, Toxin, Fire, and Oxygen.


Beginning Surgery

When operating make sure you know where you are operating, whether it be shrapnel in the upper body or a broken bone. Otherwise you will end up beginning surgery on a completely other body part.

Body.png
Erismeduiupperbody.png

When beginning surgery make sure you have everything ready, see above.

  • Use the Scalpel on your selected body part
  • Use Hemostat to clamp bleeding (Prevents bleedout)
  • Use Retractor to open the NanoUI Menu
  • On the menu select 'Diagnose' if the problems are not shown to you

Note: If you have high enough BIO (Doctors, and such) you will immediately identify issues

  • Select the required tool to heal damage.

Note: If you are unsure what to use so long you are on help intent and click on the NanoUI buttons you will be prompted with what sort of tool you need

  • Finish up with your surgery, use the Cautery tool to close the incision and complete the surgery.

Note: Failure to close the incision will lead to possible infection of the person and deal toxin damage.


Surgical Tools

Item Description

Scalpel.png

Scalpel - Used to open incisions.

Hemostat.png

Hemostat - Used to clamp bleeding and prevent bleedout. Also used to remove shrapnel and other foreign objects during surgery.

Retractor.png

Retractor - Used to open the incision, remove bone shards, and brings up the Nano UI Menu.

Bonesetter.png

Bonesetter - Used to mend broken bones or repair fractures.

CircularSaw.png

Circular Saw - Normally used to open the chest cavity and skull.

SurgicalDrill.png

Surgical Drill - Too be added.

Cautery.png

Cautery - Used to close the incision. Usually done after surgery has been completed.

Surgeries

Below are different tables that go through common surgical procedures. It does not include teaching people how to implant bombs into others.

Internal Organ Repair Internal Bleeding (Head/Chest) Internal Bleeding (Limbs)
Scan your patient.
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Cut open the skull/ribs with a 'Saw'
  • Move the ribs/skull out of the way with a 'Retractor'
  • Apply 'Advanced Trauma Kits' to repair organic organs and 'Nanopaste' for mechanical ones
  • If decaying, apply 'Peridaxon' with a dropper tool.

To close incision

  • Move the ribs/skull back into place with a 'Retractor'
  • Repair the damaged bone with a 'Bonemender'
  • Remove bone shards with a 'Retractor'
  • Close the incision with a 'Cauterizer'
Scan your patient.
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Cut open the skull/ribs with a 'Saw'
  • Move the ribs/skull out of the way with a 'Retractor'
  • Use a 'Hemostat' to repair damaged arteries

To close incision

  • Move the ribs/skull back into place with a 'Retractor'
  • Repair the damaged bone with a 'Bonemender'
  • Remove bone shards with a 'Retractor'
  • Close the incision with a 'Cauterizer'
Scan your patient
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Use a 'Hemostat' to repair damaged arteries

To close incision

  • Close the incision with a 'Cauterizer'
Bone Repair/Mending Foreign Object Removal Organ Transplant/Removal
Scan your patient.
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Remove bone shards with a 'Retractor'
  • Repair the damaged bone with a 'Bonemender'
  • Remove bone shards with a 'Retractor'

To close incision

  • Close the incision with a 'Cauterizer'
Scan your patient.
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Search for foreign bodies with a 'Hemostat'
  • Search until no foreign bodies remain.

To close incision

  • Close the incision with a 'Cauterizer'
Scan your patient
  • Open an incision with 'Scalpel'
  • Stem the bleeding with 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with 'Retractor'
  • Cut open the skull/ribs with 'Saw'
  • Move the ribs/skull out of the way with 'Retractor'
  • Cut the selected organ free with 'Scalpel'
  • Remove the loose organ with 'Hemostat'
  • If adding organ, insert directly
  • Attach organ with 'Cauterizer'

To close incision

  • Move the ribs/skull back into place with 'Retractor'
  • Repair the damaged bone with 'Bonemender'
  • Remove bone shards with 'Retractor'
  • Close incision with 'Cauterizer'
Facial Recovery Limb Amputation Body Implantation
Aim for the patient's mouth.
  • Use 'scalpel' to make an incision.
  • Use 'hemostat' to repair vocal cords.
  • Use 'retractor' to repair skin.

To close incision

  • Close incision with 'Cauterizer'
Aim for specific limb.
  • Use 'HELP' intent.
  • Use 'circular saw' to amputate.
  • Use 'Advanced Trauma Kit' to stop bleeding
Planting the Bomb...
  • Aim at target cavity
  • Open an incision with 'Scalpel'
  • Stem the bleeding with 'Hemostat'

(skip above if using laser scalpel or operating on head)

  • Open the incision with 'Retractor'
  • Cut open the skull/ribs with 'Saw'
  • Move the ribs/skull out of the way with 'Retractor'
  • Use 'Surgical Drill' to prepare for implanting
  • Carefully put an implant in the cavity
  • Use 'Cauterizer' to connect organ module to the cavity's muscles

To close incision

  • Move the ribs/skull back into place with 'Retractor'
  • Repair the damaged bone with 'Bonemender'
  • Remove bone shards with 'Retractor'
  • Close incision with 'Cauterizer'

Maintenance.png


Internal organs removal and transplantation

  • Prepare for operation.
  • Head contains brain, eyes, and nervous system.
  • Torso contains heart, lungs, and liver.
  • Groin contains kidneys and appendix.
  • Aim for chosen area.
  • Use scalpel to make an incision.
  • Use hemostat to stop bleeding.
  • Use retractor to keep the incision open
  • (Torso/head) Use circular saw to open the cavity.
  • (Torso/head) Use retractor to keep it open.
  • Use scalpel to separate the organ.
  • Use hemostat to remove it. Caution: if you want to use this organ for transplantation, place in fridge. For cyborgization, place brain in an MMI.
  • (COMPLETING ORGAN REMOVAL OPERATION)(Torso/head) Use retractor to close the cavity.
  • Use bonesetter to fix the cavity.
  • Use cautery to close the incision. Done.
  • (THE BEGINNING OF THE TRANSPLANTATION) Complete first three (five for torso/head) steps.
  • Place the organ into the cavity.
  • Use hemostat to connect organ.
  • (Torso/head) Use retractor to close the cavity.
  • (Torso/head) Use bonesetter to repair the cavity.
  • Use Advanced Trauma Kit/nanopaste if necessary.
  • Use cautery to close the incision. Done.

RIG removal from a corpse

  • Put the body on the operating table.
  • Aim at the torso.
  • Use welding tool or circular saw to open the RIG.
  • Remove RIG's control module from the back.

Autopsy

  • Use scalpel on all areas you want to scan.
  • Use autopsy scanner on all areas you want to scan.
  • Print report by clicking on autopsy scanner.

Robotics Related Surgery(Augmentations)

Robotic Limb Repair Installing Limb Augmentations Installing Chest.
Scan your patient
  • Use a 'Welder' on the robotic limb in case of dents.
  • Use a 'Cable Coil' to repair burned wires.
  • If the damage is too severe, then place your patient on a table.
  • Use a 'Screwdriver' to unscrew the hatch on robotic limb.
  • Use the 'Welder' again to repair internal damage.
  • Use 'Cable Coil' again to rewire important parts.
  • Finally, use the 'Screwdriver' again to close the hatch.
Organic Limbs
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Install the arm augment(Armblade,tools,mechanical muscles etc.) by clicking "Insert"
  • Close the incision with a 'Cauterizer'

Robotic Limbs

  • Use the 'Screwdriver' to unscrew the hatch.
  • "Insert" the augment.
  • Use the 'Screwdriver' again to close the hatch.
Chest(Subdermal Armour)
  • Open an incision with a 'Scalpel'
  • Stem the bleeding with a 'Hemostat'

(skip above if using laser scalpel)

  • Open the incision with a 'Retractor'
  • Insert the augmentation.
  • Use the 'Retractor' again to remove bone shards.
  • Close the incision with a 'Cauterizer'
Back to Guide Page