Guide To Technomancy ErisEn

Status: Ported construction from bay12, currently testing all construction methods for corrections

Technomancers

The Technomancers and their Exultant were hired by the Captain to maintain the equipment and engine of the CEV "Eris." They were given the engineering section of the ship as their home for the journey. As per the agreement, the Technomancers will keep the ship's hull integrity and power at maximum capacity while repairing any hull breaches with no payment given aside from their salary. However, Technomancers may charge for cosmetic repairs or new additions to the vessel. For more information on the Technomancers, please see The Technomancer League

If you are looking how to set up the engine see this Guide to the Engine

Construction

All Technomancers and their Exultant must know how to build and repair the ship. This section will give you the knowledge of construction, deconstruction, and repair for anyone even the lowly vagabond to learn the basics of Technomancy.

Structural

Flooring

Floors
Construction	Materials	Tools	Method
Lattice	1xRod	Welding tool	Construction With rods in hand, click on empty space tile. Used as a basis for plating. Deconstruction Use a welder to deconstruct the lattice into a rod.
Catwalk	1xRod		Construction With rods in hand, click on lattice or plating. Used as a more permanent structure over open spaces or to leave underfloor piping and wiring visible. Deconstruction Use a welder to deconstruct the catwalk into a rod.
Plating	1xSteel	Welding tool Crowbar	Construction Use a regular floortile on lattice. Blocks air and can be used for further construction. Deconstruction Use welder on the plating. Use crowbar on the plating to deconstruct into Steel. Repair Use a welder to repair the plating
Floor	1xany floor tile	Crowbar	Construction Use any floor tile on plating. Floor tiles cover up wires and pipes. You can also construct wooden and other floors the same way.

Walls

Walls
Construction	Requires	Tools
File:Wall new.png Regular Wall	4x File:Metal.png OR 2x File:Metal.png and any 2x stacked material.		Construction File:Metal.png Use metal to make wall girders. File:Metal.png or File:Metal r.png use metal or plasteel on the girders to make the wall. Deconstruction File:Welderon 32px.gif Welder. Wrench the remaining girder.
File:Armored wall.png Reinforced Wall	2x File:Metal.png, 4x File:Metal r.png OR 2xFile:Metal.pngany 4x stacked material,		Construction File:Metal.png Use metal to make wall girders. File:Metal.png or File:Metal r.png use metal or plasteel on the girders to make the wall. Screwdriver girder to enable reinforcement. File:Metal.png or File:Metal r.png use metal or plasteel to reinforce the girders. Does not effect final wall strength. File:Metal.png or File:Metal r.png use metal or plasteel to finish the wall. Does effect final wall strength. Deconstruction Wirecutters. Screwdriver. File:Welderon 32px.gif Welder. Crowbar. Wrench. File:Welderon 32px.gif Welder. Crowbar. Screwdriver. Wirecutters. Wrench the remaining girder.
File:GrilleNew.png Grille	2x		Construction Use rods to create a grille. Deconstruction Wirecut to dissassemble. Extra You can place a powered wire underneath to electrify the grille. You can wrench the grille to unanchor or reanchor it so it can be moved.
File:Frame.png Low Wall	2x File:Metal.png, 4x , 2x		Construction File:Metal.png Use metal sheets to create the low wall. Use rods on the low wall to add a grille. Use glass on the low wall to add a window. Screw the window into place. Pry the window into the frame. Screw the window into the frame. Deconstruction Unscrew the window from the frame. Pry the window out of the frame. Unscrew the window from the frame. Deconstruct the window. Cut the grilles. Deconstruct the low wall. Extra You can place a powered wire underneath to electrify the grille. You can wrench the grille to unanchor or reanchor it so it can be moved.

Glass

Glass
Construction	Requires
File:Glass panel.png Glass Panel	1x,	Click on the glass sheet, select one directional. Right-click the panel to rotate. Use screwdriver to complete construction. You can also left-click a grille with the glass sheet to place directly on the grille.
File:Glass full.png Full Glass	2x,	Click on the glass sheet, select full. Use screwdriver to complete construction.
File:Glass panelr.png Reinforced Glass Panel	1x,,	Click on the glass sheet, select one directional. Right-click the panel to rotate. Use the following sequence to complete construction: Screwdriver , Crowbar, Screwdriver. Reverse to deconstruct. You can also left-click a grille with the glass sheet to place directly on the grille.
File:Glass fulllr.png Reinforced Full Glass	2x,,	Click on the glass sheet, select full. Use the following sequence to complete construction: Screwdriver , Crowbar, Screwdriver. Reverse to deconstruct.

Airlocks

Airlocks & Doors
Construction	Requires
File:Airlock.png Airlock	4x File:Metal.png,1x,,,,File:Circuitboard.png	Construction File:Metal.png Use metal to make an airlock assembly. Wrench airlock assembly in place. (Optional) Use a pen to name the airlock. (Optional) Add reinforced glass to make a glass airlock. Add wires to assembly. File:Circuitboard.png Unlock the airlock control board with an ID card, and use it in hand to set the access levels. File:Circuitboard.png Add airlock control board to assembly. Screwdriver to finish. Deconstruction Screwdriver the door. Use multitool and wirecutters to disable everything except the doorbolts as detailed here. Doorbolts must be up for this to work. File:Welderon 32px.gif Weld the door shut. Crowbar the electronics out. (if the door is electrified, this won't work for some reason) Wirecut the wires out. Unsecure it with a wrench. File:Welderon 32px.gif Weld it to deconstruct to metal plates. If the airlock is unpowered and the bolts are down: File:Fireaxe0.png Hit the airlock with a fire axe or other weapon to break it. File:Welderon 32px.gif Use a welder to cut the door bolts. Follow the steps above.
File:Hazard airlock.png Emergency Shutter	4x File:Metal.png,,,File:Circuitboard.png	Construction File:Metal.png Use metal to make an airlock assembly. Wrench airlock assembly in place. Add wires to assembly. File:Circuitboard.png Add air alarm circuit board to assembly. Deconstruction Screwdriver the shutter to open it's hatch. File:Welderon 32px.gif Weld the shutter closed. Crowbar the Electronics out. Wrench the shutter assembly to unsecure it. File:Welderon 32px.gif Weld the unsecured assembly to disassemble it into sheets of metal.
File:Windoor.png Window Door	5x,4x ,,,,,File:Circuitboard.png	Construction Click on reinforced glass and click "windoor." Use a wrench to secure. (Optional) Add rods to make a secure windoor Add wires File:Circuitboard.png Unlock the airlock control board with an ID card, and use it in hand to set the access levels. File:Circuitboard.png Add airlock control board to assembly. Use a crowbar to finish the assembly.
File:False wall.gif Regular Hidden Door	4x File:Metal.png,	Use metal and create a wall girder. Use a crowbar on the girder, then place the rest of the metal. You can also deconstruct a wall to the girder state, then start this construction to turn an existing wall into a hidden door.
File:False wallr.gif Reinforced Hidden Door	2x File:Metal.png,2x File:Metal r.png,	Use metal and create a wall girder. Use a crowbar on the girder, then place the reinforced metal.

The Thrusters

If you are looking for the Engine Ritual you have come to the wrong place!

The CEV "Eris" is a space ship. It may not look like it, but it is. To fly through space it obviously needs thrusters, these thrusters are maintained by the Technomancers aboard. There are two thruster rooms for both sets of thrusters aboard the ship. For the inevitable Captain who may fly the ship without understanding his ship, your job will be to maintain them.

The Green Squares indicate the airlocks towards the Thruster room, the pink one indicates the shield and gravity generator airlock.

Refueling

When the time comes of CEV "Eris" drifting through space, you will need to refuel the thrusters immediately, lest you hear the ominous announcements of Meteor's incoming forever. Before getting started, know the color coding for the following images.

• Red: Your fuel
• Light Blue: Main Pump
• Bright Blue: Vent Pump
• Pink: Fuel Valve

Each Thruster room is the same, just switched depending on which side of the ship you are on. To refuel the ship, you simply need to flood plasma into the borosilicate rooms as seen in the images.

Select your fuel, nominally it is plasma, and open the canister you are going to use to fuel. Then Open the valve (Light Blue) to begin pumping plasma into the mixing chamber.

You have just refueled the ship. However, always remember to keep the Fuel Valve OPEN (Pink) and it will be indicated as so if there is a green or red light.

Things to Note: You can ignite the fuel for more thrust, and even mix O2 into it, essentially the hotter it is, the more thrust you will obtain. However it is quite unsafe as doing so without knowing how fire works can lead to a plasma leak or worse, the detonation of the Thrusters.

Refuelling Plasma Canisters

Whenever you have expended the plasma canisters located in the Thrusters room, you may need to refuel them. To refuel the canisters wrench an empty canister to the Connector Port and open the canister. Afterwards, open the valve marked in dark green. Then just wait for the canister to be refuelled.

Note: Do not open the canister if it is not wrenched to a connector port unless you want to release plasma into the air

Experimenting

This section of the wiki is simply for those contributing to their discoveries, be they setting up the singularity generator or building a mining outpost on the asteroid. They are player created guides and not official, so experimenting with these are at your own risk. But what is a technomancer without risk?